A Solvent-Free, Biological Parts Washer Degreaser. How To Become More Environmentally Friendly and Make Savings. A Helpful Guide.

TradeShopDirect advanced Industrial biological parts cleaner for washing and cleaning industrial and commercial parts and components and even equipment.

A new generation parts washer/degreaser for multiple application and industries. It uses concentrated biologically rich microorganisms to digest the oily wash water to constantly regenerate the bath. Safe for the operator and the environment.

Environment And The Law

There are a number of laws and commitments that every business has to adhere to, it just depends on what type of business you are. For instance, if you’re a company who produces a lot of chemical waste which could be damaging to the environment, you’ll obviously be held to a lot stricter standard than an organisation, for example, delivering letters.
The type of waste from old parts washers has to be disposed of in specially-managed waste facilities. It is not possible to dispose of hazardous liquid waste down drains or landfills in the UK.

Why You Should Buy This Biological Parts Washer?

There’s an ever-increasing need for us all to abide by the law and become more environmentally friendly and aware, It doesn’t use chemicals and solvents, It ensures the health and safety of the operator and well-being of the planet because the microorganisms constantly clean the bath. It also reduces and saves you money in waste disposal.

Industrial Biological Parts Washer

This advanced Industrial biological parts cleaner degreaser solution for washing and cleaning industrial and commercial parts and components is warmed to 38°C, an ideal cleaning temperature for cleaning and degreasing parts
(and using boost mode, you can increase this to 43°C if required), it has around a 30L bath and a brush for cleaning thoroughly between the parts. It’s a large parts washer, yet compact and robust. The heated parts washer benefits from a secure lid to limit any evaporation.

The biological degreasing parts washer solution, along with a microorganism concentrated tablets provides you with around a month of cleaning, at which point you add another microorganism tablet. The microorganisms continue to clean the solution, breaking down the contaminants, so you don’t have to drain the bath like you would a regular old fashioned parts washer.

The solvent-free biological parts washer and degreaser is designed with the operator in mind, has a bath level indication and a very easy to drain, the integrated system included.


The microorganisms continue to clean the fluid and break down contaminants, so you don’t have to drain the bath like you would a regular old fashioned parts washer.

Where Can This Parts Cleaner Degreaser Be Used?

The advanced, new generation parts cleaner degreaser is designed for use with many industries and applications where thorough cleaning and degreasing of oils and contaminants of parts is required, here are a few:

Industry

Metal Working; For cleaning and degreasing all types of parts, tools.
Glass Works: Cleaning grease moulds, cutters.
Electrical/Electronics: Degreasing of motherboards, electrical components, housing.
Textiles: Cleaning combs and looms, removing textile oils, weaving filters.
Vocational Training: Degreasing components and parts for cars, motorcycles, agricultural machinery.
Plastics Manufacturers: Cleaning moulds, extractors, bearings, removing hydraulic oils.
Paper Manufacturers: Removing ink from conveyor rollers, press rolls, degreasing casings and gears.
Printing/Screen Printing: Removing ink, cleaning rollers, ink wipers, ink mixers, spray rollers, various surfaces.

Transport

Motorcycles: Degreasing housing of engines and transmissions, cylinder heads, pistons, valves, chains, sprockets, carburettor manifolds, forks, and shock absorbers and cleaning of other mechanical components.
HGV’s: Degreasing gearboxes, diesel oil centrifuges, engine blocks and housing, cylinder heads, pistons, valves
and cleaning of other mechanical components,
Rail: Spark plugs, wheel bearings and cleaning of other mechanical components.
Shipyards: Cleaning of mechanical components and engines and cleaning of other mechanical components.
Public Transport: Fleet maintenance, bus, underground, tramway maintenance and cleaning of other mechanical components.
Car: Timing covers, oil pans, clutch housing, gearboxes, cylinder heads, pistons, valves, chains, sprockets, carburettor manifolds, forks. alloy wheels, and shock absorbers and cleaning of other mechanical components.

Leisure

Boats/Jetski: Maintenance of mechanical components, engine maintenance.
Bicycle: Degreasing of chains and chainsets.
Ski Resort: Degreasing and cleaning of rope grips for cable cars and chair lifts, cleaning of internal components and springs.
Golf Courses / Racecourses: Maintenance of mowers, removal of oils, grass stains and cleaning of other components.
Campers and Caravans: Highly effective on for removal of black marks on bodywork.
Motor Sports: Timing covers, oil pans, clutch housing, gearboxes, cylinder heads, pistons, valves, chains, sprockets, carburettor manifolds, folks. allow wheels, and shock absorbers and cleaning of other mechanical components.

Medical

Degreasing of titanium prostheses.
Removing polishing compounds.

Public Bodies And Authorities

Army & Police: Degreasing of arms and weapons and components, including barrel and breech.
Cemeteries: Equipment Maintenance.
District Councils: Cleaning of maintenance equipment, Refuse lorries, sweepers, mowers.
Local services: Fleet maintenance, cleaning mower blades, hedge cutter blades, plastic housing, carburettors,
chains, guides and casting on chainsaws, air filters and cleaning of various equipment,
Forestry: Cleaning mower blades, hedge cutters, plastic housing, chains, guides and casting on chainsaws, air filters and cleaning of various equipment,
Public Swimming Baths: Cleaning pumps, boilers and apparatus.
Water Treatment Plants: Cleaning pump, filters and pipes.

Agriculture / Agro Food

Horticulture: Maintenance of agriculture equipment,
Processing: Cleaning of pumps, milk treatment equipment, degreasing of metal moulds, degreasing of housings, plant maintenance conveyors, degreasing of gear reducers and effective cleaning of frying oils.
Abattoirs: various cleaning of components.

Construction & Civil Engineering

Quarries: Cleaning of conveyors, degreasing of hydraulics systems, maintenance of site machinery and dust removal.
Equipment Hire Companies: Maintenance of heat appliances, dust removal from housings and filters.
Motorway Construction Companies: Vehicle and equipment maintenance.
Tunnel Construction: Cleaning of conveyors, degreasing of hydraulics systems, maintenance of site machinery and dust removal.

Questions To Ask Yourself

Operators Health

Is it solvent free?
Are there optimal hygiene and safety conditions? Remember that solvents affect health. Short-term effects of solvents can include; irritation of eyes, lungs skin, cause headache, nausea, dizziness and light-headedness.

Savings

Does It have consumable cost control and is it a low cost to run?
Are there microorganisms that continue to clean the fluid, breaking down the contaminants so you don’t have to drain the bath like you would a regular old fashioned parts washer?

Environment

Does it minimise waste?
Is it kind to the environment?

How To Buy The Parts Washer Degreaser

Finding the right environmentally friendly alternative to traditional solvent-based cleaners, couldn’t be easier,

Trade Shop Direct has always been at the front of offering great new products and support for our industrial and commercial trade customers and we are proud to say that we the UK reseller for the industrial biological parts washer and environmentally-friendly cleaning solutions. We have a great choice for the modern and savvy user of today.

We’re excited to now sell this new advanced biological parts cleaner and degreaser. Buy this Biological Parts Washer from us here and just leave the concentrated, biologically rich microorganisms, digest the oily wash water to constantly regenerate the bath in an environmentally-friendly way.

General UK Lockout/Tagout Procedure

lockout tagout procedure.jpg1

ONLY TRAINED & AUTHORISED PERSONNEL ARE PERMITTED TO LOCK OFF EQUIPMENT.

Prepare for shutdown.

Identify the type of energy used to operate the equipment.

Ensure that any secondary energy sources are also identified.

Identify the amount of energy used to operate the equipment.

Identify the potential hazards of that energy.

Locate the method of controlling that energy (switches, breakers, valves etc.)

Inform all affected employees.

Identify all employees who may be affected by the shutdown of equipment and inform them of the shutdown.

Ensure they know who is locking off the equipment and why.

Turn off the equipment.

Turn off the equipment using the operator controls

Follow the standard procedure for shutdown and ensure no-one is at risk when doing so.

Isolate all energy sources.

Ensure that ALL energy sources have been isolated.

Ensure that any secondary energy sources are isolated.

Ensure that ALL stored energy in the equipment is dissipated, e.g.

relieving trapped pressure.

releasing tension in sprints or block their movement.

block or brace parts that may fall due to gravity.

block parts in hydraulic and pneumatic systems that could move due to loss of pressure

bleeding, venting, flushing pipes with liquids or gases, ensuring appropriate precautions are taken against hazardous contents.

dissipating heat or cold and wear appropriate protective clothing.

Monitor and react to situations where stored energy can re-accumulate.

Lock off switches.

Lock off all switches or other energy controls (e.g. valves, circuit breakers) by using a suitable lock off device.

Only devices specifically designed for locking out should be used.

Each person working on the equipment should have their own personal padlock.

Each personal working on the equipment should place their padlock on the locking off device.

If the isolation device cannot support the number of padlocks needed, use a hasp or other suitable devices as necessary.

Apply purpose designed tags to the lockout to warn employees of the danger of the re-energising the equipment. These tags should be fit for purpose – durable, resistant to environmental conditions and attached securely to the lockout device.

Ensure the details of the tags are completed in full.

Test the equipment controls and circuits.

Make sure that all danger areas are clear from personnel and switch on the equipment.

Press ALL the start buttons or activation controls on the equipment to test the correct circuits have been isolated.

Test all of the circuits using the appropriate testing equipment to ensure that they have all been isolated.

Verify the main disconnect switch or circuit breaker can not be turned on.

Perform maintenance.

When preforming the maintenance of the equipment ensure that your actions will not reactivate the equipment.

If modifying or installing new equipment ensure that your actions will not reactivate the equipment.

If modifying or installing new equipment do not bypass the lockout.

When maintenance is complete ensure the correct reactivation procedure is followed to ensure the safety of both the person(s) working on the equipment and any employees that may be affected.

What is Lockout Tagout?

lockout tagout procedures1Basically Lockout Tagout is a physical method of preventing equipment from being re-energised when it is unsafe to do so.

Every year a large number of workers are injured in industrial accidents resulting from the unexpected start-up of workplace equipment and machinery. By ensuring that Lockout Tagout procedures are followed the risk can be prevented and injuries minimised.

Lockout is a physical method of keeping equipment from being re-energised, stop any unexpected movement, prevent the release of stored energy including the flow of gases and fluids. For example, to isolate an electrical circuit turn the appropriate breaker to the off position and place a lockout device in place to keep in this position. A padlock is then put in place on the lockout device to ensure it can only be removed by the person who locked it off.

Tagout is a highly visible warning placed on the equipment which has been isolated.  The tag should be of sufficient durability for the conditions, attached securely and proved details of the person who applied it. A tagout system should never be used without an appropriate lockout procedure as it does not provide the same measure of protection.

Lockout Tagout procedure should be followed during repair or maintenance of equipment where a worker could be injured by the unexpected start up of machinery. Depending on the type of machinery and energy source depends on which lockout device is used, energy can take many forms, which may include:

Electrical energy – commonly found powering nearly all workplace equipment.

Hydraulic energy – commonly found powering forklifts, cutting equipment and pumps.

Mechanical energy – commonly found in all machinery with moving parts.

Thermal energy – commonly found in equipment such as ovens or freezers (hot & cold).

Pneumatic energy – commonly found powering machinery via compressed air or gas.

Potential – commonly found in compressed springs or suspended weights.

Only trained and authorised employees are allowed to perform repairs, servicing and maintenance on equipment, and therefore training of all affected personnel must be arranged. This includes authorised employees who will be performing maintenance on the equipment as they need to recognise hazardous energy sources and the means necessary for isolation and control.

All other employees, contractors and visitors need to be made aware of the Lockout Tagout procedure with specific emphasis on the prohibition relating to attempts to restart or re-energise equipment which has been locked out.

Tags are an effective way of communicating the status of equipment which is undergoing maintenance.  Appropriate tags should be provided by the employer and be fit for purpose, they need to be:

  • Durable and hardwearing
  • Resistant to moisture, oils and other contaminants.
  • Easy to read and understand
  • Identify the person who installed it
  • Be attached using a method which is secure and that cannot be easily released. They should also be able to be attached by hand and should not be re-used.

Tags should always be used in conjunction with an appropriate lockout device. In some instances where it is not possible to attached a lockout device then tags may be used if there is no other physical alternative of isolation.

Further information can be found in current UK legislation. This has been put in place to prevent such accident occurring by controlling unauthorised or accidental use of energy.  The Provision and Use of Work Equipment 1998, Section 19 Energy and Electrical at Work Regulations 1989, Regulation 13 both specifically cover these aspects.

In addition The Health and Safety at Work Act 1974 and The Management of Health & Safety at Work Regulations 1999 both state that an employer should ‘make suitable and sufficient assessment of the risks to the health and safety of his employees’ and ensure their ‘health, safety and welfare at work’.

Also the Health and Safety at Work Act 1974 also states that it is also the responsibility of the employee to ensure the ‘health and safety of himself and of other persons who may be affected by his acts or omission of work.

Ensure your workplace environment and employees are safe and risks are minimised by following strict Lockout Tagout procedures.  If you need help and guidance please call 01353 665141, our Lockout Tagout specialist will be happy to advise.

How to make outdoor steps safe in wet weather.

safe steps

Did you know falling on slippery steps is the number one cause of accidents and injuries around the home; whilst we know salt is good in the snow and you can add grit to your steps in the winter it can be a messy old business.

To make your stairs and steps safer it’s a good idea to fix abrasive strips to each level. First you will need to make sure the surface is clean and dry, then simply attach a self-adhesive strip near the front of each step.

Our safety tread tape has a finely ground aggregate bonded to the surface to enhance the non slip properties and is available to buy by the roll, which is perfect for ensuring all of your outdoor surfaces are safe.

The textured tape is available in black, yellow & black chevrons and transparent (clear); it can be used inside and outdoors.  Our anti-slip tape is suitable for pretty much any edge that needs to either be clearly visible or anti-slip including ladders, boats and decking areas. The exceptional high bonding properties of the tape makes it suitable for sticking to wood, metal, concrete and tiles.

Ensure your home and workplace is safe this winter and call us on 01353 665141 to place your order or ask for further advice.